2024 IEEE EMC+SIPI Symposium
August 5 – 9 | Phoenix, AZ
Maury Microwave | Booth #310
.png?width=400&height=400&name=Untitled%20Project.00_00_00_00.Still002%20(2).png "2024 IEEE EMC+SIPI Symposium")
Join Maury Microwave at booth #310 during the 2024 IEEE International Symposium on Electromagnetic Compatibility, Signal & Power Integrity (EMC+SIPI).
The Maury Microwave booth features a demonstration for precise and reliable EMC immunity that satisfies emerging high-frequency standards. Products highlighted include amplifiers with wideband ranges and outstanding linearity; power sensors with fast measurement speed and industry-leading performance for high-integrity testing; phase-stable and amplitude-stable cable assemblies; and low-loss, high-power couplers.
These best-in-class solutions provide the performance necessary for modern EMC testing.
EMC+SIPI Demonstration Guide
Learn all about our demo in booth #310 and download the demo explanation guide
EMC immunity testing evaluates device performance under different levels of electromagnetic interference.
Amplifiers are critical for generating power levels strong enough to drive antennas to required field strengths, facilitating appropriate testing of equipment within EMC chambers. To ensure test accuracy and compliance with emerging high-frequency standards (6 GHz to 40 GHz), amplifiers must meet wideband range requirements, maintain linearity for signal integrity, and handle modulated signals efficiently.
This demonstration highlights how Maury Microwave best-in-class solutions support precise and reliable EMC immunity testing with the MPA-series amplifier, RTP5000 Series Real-Time Peak Power Sensor, StabilityPlusTM phase stable cable assemblies, and LLC-series low-loss, high power bidirectional airline coupler.
EMC+SIPI Demonstration: Featured Products
Explore the products used in the EMC immunity testing demonstration
Test & Measurement Amplifiers for EMC Immunity Testing
The MP-series of T&M instrument amplifiers (600 MHz to 67 GHz) ensure EMC immunity testing meets industry standards, offering high reliability, outstanding wideband ranges, and linear performance. All units support full CW, pulsed, AM, PM, FM, or complex modulation such as OFDM. The user-friendly remote-control features, integrated couplers, and power detection enable close positioning to the radiating object for minimal cable insertion loss.
RTP5000 Real-Time Peak USB Power Sensors
The RTP5000 Real-Time Peak USB Power Sensors of the Boonton product line address challenges faced by engineers and technicians who design, verify, and maintain systems utilizing pulsed signals. The RTP5000 series incorporates Real-Time Power Processing™ and offers faster rise times; better time resolution; the fastest measurements (100,000 per second); and a complementary, simple, intuitive, and powerful graphical user interface.
StabilityPlus Phase-stable Cable Assemblies
StabilityPlus phase-stable cable assemblies (SP-series) set the standard for high-performance ruggedized microwave/RF cable assemblies. Designed specifically for phase-stable and amplitude-stable applications, StabilityPlus offers excellent measurement repeatability even after cable flexure.
Low-Loss, High-Power Bidirectional Airline Coupler
The LLC-series of bidirectional airline couplers represents a breakthrough in high-power coupler technology. Combining precision machining with stellar electrical characteristics, LLC-series couplers offer unmatched performance with high directivity and low insertion loss for broadband performance.
EMC Immunity Testing
Discover how our EMC line of amplifiers has the performance necessary for EMC testing
Maury Microwave has more than 60 years of experience in designing, manufacturing, and supporting turnkey measurements solutions.
Our expertise includes base station and handset, radar, Wi-Fi, and FEM testing. EMC testing is a natural fit.
EMC is now venturing into higher frequencies beyond 6 GHz, integrating modulation testing into its standards. The overlap between typical semiconductor and FEM testing techniques with EMC is getting closer and closer.
The Maury Microwave EMC line uses the experience of the semiconductor industry to offer outstanding wideband ranges and linearity required for modern EMC testing.
Maury Microwave
Maury Microwave is your calibration, measurement, and modeling solutions partner. We supply adapters, cable assemblies, and attenuators; coaxial and waveguide VNA calibration kits, calibration standards, and calibration systems; turnkey characterization solutions including measurement and modeling software, impedance tuners, load pull and noise parameter systems, and more. Further expanding our test and measurement technology portfolio, our distinct series of product lines provide various leading-edge solutions across satellite channel emulation, RF power measurement, high-performance phase noise analysis, RF synthesis, and noise generation. With our best-in-class solutions, we complete your lab.
Featured Product Lines
Amplifiers
Combining measurement and load pull expertise with modern solid-state power amplifier design practices, the test and measurement instrument amplifiers offer the highest reliability and support for each unique application and use-case. These best-in class amplifiers satisfy a wide range of application-specific requirements, including simultaneous high-power, wide bandwidth, low harmonic power, and high linearity. For EMC immunity testing, the EMC line of amplifiers offer outstanding wideband ranges and required linearity, supporting the future development of 5G products, automotive and ordinary equipment, and military systems while ensuring compliance with various international standards.
Device Characterization
Industry-leading device characterization solutions encompass active load pull systems, impedance tuners, pulsed biased systems, measurement and modeling software, and various system accessories. Turnkey one-box active load pull solutions combine multiple bench setups into a single box, offering unrivaled load pull speeds and maximum smith chart coverage. Impedance tuners range from automated, manual, and stub tuners, while pulsed biased systems include pulsed IV and SMU systems. Accessories include current probes, load pull test fixtures, low-loss couplers and pulsed bias tees, multiplexers, and noise conditioning modules. Device characterization solutions are supported by a comprehensive software suite for seamless and optimized testing.
Interconnects
Interconnect solutions encompass a broad range of products designed to reduce measurement uncertainties and improve measurement accuracy and repeatability. The range of available adapters include calibration-grade metrology adapters, color-coded precision adapters that combine high performance with ease-of-identification, adapters that feature a quick-connect design with a push-on/pull-off capability, and adapters targeted for daily use in RF and microwave labs or production facilities. Cable assembly solutions offer high flexibility, phase stability, and optimization for use in thermal vacuum chambers (TVAC) and accurate, repeatable on-wafer measurements. Color-coded precision coaxial attenuators reduce signal power without adding distortions, while additional testing tools span connector gage kits to torque wrenches.
Boonton
The Boonton product line features high-performance RF and microwave test equipment for radar, avionics, electronic warfare, satellite and wireless communications, and EMI/EMC applications. Used across the semiconductor, military, aerospace, medical and communications industries, these solutions enable a wide range of RF power measurements and signal analysis for RF product design, production, maintenance, and system integration. The Boonton product line includes peak and average RF power meters, real-time USB power sensors, RF signal generators, RF voltmeters, modulation analyzers, and audio analyzers.
